TLDR: As of firmware 2026-01-21 moteus now has a maximum modulation depth that is 6% larger than before. That means the maximum speed for a given voltage is that much higher. Read on for the effort invested in making that happen.

Way back in 2020, I wrote about the motor saturation model that moteus uses to accurately calculate torque when a motor is operating in a region where the stator becomes saturated. What I didn’t write about was a method for actually determining those fit parameters for a given motor. This isn’t too critical, as most position mode applications don’t require the applied torque to be terribly accurate, but in some cases it does matter. When that is the case, there is now a tool that can calculate parameters appropriate for entering into moteus. Read on to find out more!

Recently I announced an updated version of the moteus performance analysis tool. It’s development was unique in that I used the Claude Code agent to do basically the entire project, modulo copying the simulation logic from the original mpat tool. It was my first attempt at using any of the LLM based coding agents and I have a few takeaways:

Using the newly data from the newly released moteus performance analysis tool, we’ve gone and updated the rated output currents for each moteus controller. The conventions for such ratings are measured at 24V supply voltage with the default PWM frequency selected.

In addition, each value has a link to the mpat page which shows that value in context, so you can see for instance that the 62A current with maximum cooling for the moteus-x1 requires even more cooling than just a 12V fan alone provides.

mjbots.com now stocks PWM controlled cooling fans with RPM sense and mounting brackets that are compatible with the moteus-r4, moteus-n1, and moteus-x1. Check them out here:

Read on to see how much these can improve the performance of your system and what configuration options are available.

Well, that didn’t take long! Only a short time ago I announced the first release of the moteus performance analysis tool. In that short time frame, I basically did a complete rewrite (more on that later on), that added a bunch of new capabilities. You can now create nearly any table comparison you can imagine, enter custom motor configurations and even produce 2D graphical plots showing supply power, temperature, or efficiency versus speed and torque. Check out the tool live here, and read on to learn more.

Recently I showed I was able to use the new dynamometer fixture I built to capture detailed thermal modeling parameters for motor controllers and motors. In this post, I’ll describe how I turned that into the initial version of a tool that lets you compare the performance of different moteus controllers (and some others), along with different motors, to help design an overall motion system.

TLDR: Try it out: Moteus Performance Analysis Tool