While working to build the reduced weight moteus servo mk2, I got tired of hand machining the first operation on a manual mill and lathe for the front and back housings.  It was necessary, primarily to enable workholding on the PocketNC v2-50, but also because it allowed me to remove much of the excess material more quickly than could be done on the PNC.  So, I got trained up on the AA CNC Bridgeport and went to town.

I have been trying to improve the tool paths for the BE8108 gearbox sun gear holder.  The first time, I ended up slowing things down a lot and actually took some of the initial adaptive passes in several iterations as I fixed problems, so it wasn’t clear that any one iteration would be functional from start to finish.

So,  I tried it on a fresh piece of stock, with settings that I thought would resolve the pullout issues I had seen earlier.  Lo and behold, what did I find but more pullout!  It appeared to happen in exactly the same situations as before.  The adaptive clearance would leave a thin sliver of material, then “round it off” very rapidly, resulting in a large chunk of sliver hitting the mill at once.  Increasing the minimum cutting radius and tolerance helped reduce the problems some, but didn’t get rid of them entirely.