I’ve been looking for a new motor control project to tackle that is both interesting, and a bit more unique than another Ascento clone. Looking around, I was surprised at the current paucity of robots capable of more advanced juggling feats. There are quite a few that can manage 3 balls, and nearly none I’ve found that can manage more, with the exception of Nathan Peterson’s inclined ball roller. I figure that I have access to lots of factory second moteus controllers, which are capable of quite demanding control applications, so I should be able to put something together.

For the moteus brushless controller, the moteus_tool utility has long had a --dump-config command line action which will cause the entire contents of the configuration to be written to standard output.

--dump-config format

This configuration looks like this:

servo.pid_position.kp 4
servo.pid_position.kd 0.1

moteus_tool has also had a --write-config option, which is something of a misnomer, as it actually just sends any commands one at a time from a file to the controller. Notably, it requires that the file to contain actual valid diagnostic mode commands.