To date, all of the development tools for the moteus brushless controller have been available exclusively for Linux based operating systems. I’ve been doing some behind the scenes work, and have gotten to the point where moteus_tool now runs natively on windows and can communicate with moteus controllers using a fdcanusb.

Check out the Windows installer for the latest release:

• moteus_host_tools_0.1.2020.1106.msi

To make this work, I started from the excellent grailbio/bazel-toolchain, which provides LLVM toolchains for Linux based systems based on the official LLVM pre-compiled binaries. I forked that into mjbots/bazel-toolchain and added Windows support. It isn’t perfect, because the LLVM project only distributes Windows binaries in installer form, and it isn’t possible to extract binaries from them without specialized tooling. So, this version relies on a manually re-packed compressed archive of all the executables.

To stay on top of bazel development, and to prepare for some future improvements, I’ve gone ahead and upgraded the moteus firmware build system, rules_mbed to use the new bazel “platforms” toolchain resolution mechanism.

Previously, rules_mbed used the “crosstool_top” bazel mechanism for toolchain configuration. This allowed a single package to contribute a set of C++ toolchains which would be selected based on CPU and compiler. One of the downsides from the rules_mbed perspective, is that it made it difficult to make a build that included both mbed targets and host targets (or anything else non-mbed). rules_mbed worked around this by including a functioning clang host toolchain within it.

As part of some experimentation in native Windows tools for moteus, I’ve created a dirt simple rules_wix repository in github. It provides a minimal wrapper around the WiX Toolset for creating Window’s installers from within bazel. There’s nothing fancy there yet, but it can at least make an installer with a single executable in it!

• https://github.com/mjbots/rules_wix

A previous simulator I had built for Super Mega Microbot was based on the “DART” robotics toolkit.  It is a C++ library with python bindings that includes kinematics, dynamics, and graphical rendering capabilities under a BSD license.  I wanted to use some of its dynamics capabilities for future gait work on the quad A0, and eventually re-incorporate its simulation capabilities, so integrated a subset of it into mjbots/bazel_deps.

• github: Incorporate a subset of dart and its dependencies

While working on the next revision of the moteus controller, I started by bringing up a software toolchain on a NUCLEO-G474RE board.  Unfortunately, even the most recent mbed 5.14 doesn’t yet support that processor.  Thus, I have a half-baked solution which pulls in the ST CUBE sources for that controller into the mbed tree as a patch.

https://github.com/mjbots/rules_mbed/blob/master/tools/workspace/mbed/stm32g4.patch

The patch only implements wrappers for the things I care about, so it isn’t a complete solution. Since I am not really using any mbed libraries anymore in any project, that isn’t a whole lot.  Right now I’m just using it for the one function that sets up the board, a linker script, and the pin mappings.  I will probably eventually just make a rules_stm32 and ditch mbed entirely but for now that is more work than it is worth.

When I initially created rpi_bazel, I set it up to use a host provided clang.  I decided to update that so that the rpi_bazel rules themselves download a binary version of an arbitrary clang.  This lets you decouple the version of clang from what is available in any given Linux distribution and improves the reproducibility of builds, since you are no longer dependent on whatever PPA you used to grab clang from.

After OpenCV, the other major dependency the mjmech software has, which is necessary to complete the raspberry pi 3b+ bazel build setup, was gstreamer. Unlike the previous dependencies, this one is a doozy – gstreamer has an enormous transitive dependency set. Additionally, we needed to use its ffmpeg wrappers, which brings in more dependencies.

In this post, I’ll just try to map out the dependencies that we ended up actually needing, so that they can be tackled one by one.

The next level of difficulty in bazel-ifying packages for mjmech was opencv.

First, for the impatient, Apache 2.0 licensed sources are available on github: https://github.com/mjbots/bazel_deps/tree/master/tools/workspace/opencv

OpenCV’s native build system consists of nearly 200 cmake files with over 20,000 total lines of code, plus assorted helper scripts and prototype files which are substituted into.  Fortunately, I didn’t need to support the full complexity of the opencv build system.  Things I didn’t bother to touch:

This is part N in a series describing how I created the bazel infrastructure to build all the third party packages for mjmech.  Previously we have:

• Building mjmech software with bazel
• Configuring bazel to cross compile for the rpi3
• Building mjmech dependencies with bazel
• First bazel-ified packages

We left off with the first, very simple packages configured to build with bazel.  In this installment we will tackle those that require at least minimal configuration, i.e. those that have some files which are normally generated as part of the build process.

When working on the firmware for Super Mega Microbot’s improved actuators, I decided to try using mbed-os from ARM for the STM32 libraries instead of the HAL libraries.  I always found that the HAL libraries had a terrible API, and yet they still required that any non-trivial usage of the hardware devolve into register twiddling to be effective.  mbed presents a pretty nice C++ API for the features they do support, which is only a little less capable than HAL, but still makes it trivial to drop down to register twiddling when necessary (and includes all of the HAL by reference).