The moteus line of brushless controllers all have an integrated “on-axis” magnetic encoder. These encoders are designed to allow moteus to sense the position of a motor’s shaft directly, assuming that an appropriate diametrically magnetized sense magnet is attached to the rotating shaft and the moteus is mounted so that its sensor is positioned over the magnet.

This works great for many applications, but what about hollow shaft motors? moteus supports a few encoder types that will work for off axis encoders, most notably is the AksIM-2. This is a high performance off-axis encoder that gives great performance and is manufactured in configurations for a variety of hollow shaft diameters. However, it does have downsides. First, it comes with a commensurate price tag. In single quantities, the AksIM-2 and magnetic code disc are more expensive than an entire moteus brushless motor controller. Second, only the moteus-n1 has the necessary RS422 transceiver integrated into it. All other moteus boards need an external RS422 transceiver.

It’s time to announce support for yet another encoder type in moteus, this time the MA600 precision tunnel magnetoresistance (TMR) sensor. Compared to hall effect magnet angular sensors the MA600 has lower noise and less non-linearity. It has a SPI interface and operates from 3.3V. When used with moteus, it can be connected to AUX2 on moteus-c1 and moteus-n1, and to AUX1/ENC on moteus-c1, moteus-n1, and moteus-r4. Support is available in firmware version 2024-10-29 and newer.

On axis performance

To show what it is capable of, I mounted a small breakout board above an on-axis magnet attached to a mj5208.